Degreasing, Etching and Painting works

  After we did take off the parts, we started doing the exterior works.

  In my position, I degreased the parts for the first step with my partner. This procedure was not really difficult, however, it took lots of time for the preparation of wearing the safety equipments. The equipments included the safety glasses, mask, gloves and suitable clothing for sure.

  In the second step, I was etching the parts with the similar procedure of the first step and wearing the same safety equipment of the first step. The only thing that is different than the first step is, it needed to wait 10 minutes before rinsing the parts.

  The final step was to paint all the parts. It was the most complicated works of the whole procedure because you can't do the painting jobs while the humidity is pretty high.

 

Parts that we have to degrease and etch

Painting works

Another cleaning work